<p>RP2350-USB-A mini development board, based on for Raspberry Pi RP2350A, with onboard USB interface, using half-hole technology, can be welded on a custom board.</p> <p>2 SPI, 2 I2C, 2 UART, 4 12-bit ADC and 14 controllable PWM channels</p> <p>Onboard 1 USB expansion port, compatible with USB2.0\/1.1 transmission.</p> <p>RP2350A's 15 GPIO pins are brought out.</p> <p>12 programmable I\/O (PIO) state machines for custom peripheral support</p> <p>1.Uses the for Raspberry Pi official self-designed RP2350A microcontroller chip</p> <p>2.Unique dual-core, dual-architecture, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard 3 RISC-V processor, with a clock frequency of up to 150MHz,Built-in 520KB SRAM and 2MB on-chip Flash</p> <p>3.Use Type-C interface, keep up with the trend of the times, no need to worry about whether to plug it in the right or wrong direction</p> <p>4.Stamp hole design, can be directly welded and integrated into the base plate designed by the user</p> <p>5.USB1.1 host and device support</p> <p>6.Onboard 1 USB expansion port, compatible with USB2.0\/1.1 transmission</p> <p>7.Supports low power sleep and hibernation modes</p> <p>8.USB can be recognized as mass storage for drag-and-drop downloading</p> <p>9.Accurate on-chip clocks and timers</p> <p>10.Built-in temperature sensor</p> <p>11.On-chip accelerated floating point library</p> <p>The product appearance and printed words may vary depending on the batch, but this does not affect use</p> <p>Colour:Retro Color</p> <p>Material:PCB</p> <p>Package Contents:</p> <p>1 x Rp2350A Usb Board</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>