V5 V6 CNC 40mm 3D Touch Probe Edge Finder to Find the Center Desktop CNC Probe Formach3 and Grbl Gr

NOK 1 099,00
+ NOK 84,99 i frakt

V5 V6 CNC 40mm 3D Touch Probe Edge Finder to Find the Center Desktop CNC Probe Formach3 and Grbl Gr

  • Merke: Unbranded

V5 V6 CNC 40mm 3D Touch Probe Edge Finder to Find the Center Desktop CNC Probe Formach3 and Grbl Gr

  • Merke: Unbranded
Veiledende pris: NOK 1 249,00
Pris: NOK 1 099,00
Du sparer: NOK 150,00 (12%)
Solgt av:
NOK 1 099,00
+ NOK 84,99 i frakt

På lager

Vi godtar følgende betalingsmetoder

Beskrivelse

Shop name:Chong Qing Shuo Yue Ke Ji You Xian Gong Si 1.Clamp the probe on the machine spindle through the tool holder, and loosen it slightly.The two opposite fastening screws at the bottom can adjust the four symmetrical adjustment tops on the side.The ball head of the wire adjustment probe coincides with the center of the spindle. 2.There is no need to rotate the spindle when measuring the centering, and the centering measurement can make the probe rotate Turn 180 to make the measurement more accurate. 3.The probe supports measurement in three directions, X, Y, and Z, with reciprocating positioning accuracy less than 0.01, X Y deflection range 0-6,Z direction telescopic range 1mm, exceeding Leaving the safe range will damage the probe and probe. 4.The probe has two built-in CR1616 3V lithium button batteries(not include),Loosen the fastening screw and adjusting top wire when it is insufficient, remove the top cover to replace it,Pay attention to the positive and negative poles of the battery when replacing, and re-adjust the probe center position after replacement Set. 5.The side head does not support the detection of insulating materials and insulated machine bed. Name:The photoelectric 3D edge finder The probe supports dust and a small amount of dripping and water resistance, do not drip for a long time Dimensions: repeat positioning 0.01,Z direction stroke 1mm, XY swing about 6 degrees. Probe thread , ball head diameter 4mm, length 40mm. The detection of insulating materials and insulating spindles is not supported. Power Suplly:two CR1616 3V lithium button batteries(without battery) Type:Green Light Colour:Gray Material:aluminum alloy Package Contents: 1 * 3d photoelectric edge finder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo-ID: 165148117-351848908
  • EAN: 4713745042292

Levering og retur

Sendes i løpet av 3 dager

  • STANDARD: NOK 84,99 - Levering mellom kl fre. 03 oktober 2025–tir. 14 oktober 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Hpcl Factory
  • hui zhou shi tang tang ke ji you xian gong si
  • Cheng Qu San Dong Zhen Zhu Yuan Lu 8 hao
  • Zhong Zhou Tian Yu Hua Yuan Di 10 dong 27 ceng 01 hao Fang
  • Hui Zhou
  • China
  • 516000
  • qingmingdo@outlook.com
  • 15363471640

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr 56 40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698