<p>This USB C-to-Dual- public audio cable can convert smart devices (mobile phones, , tablets) with TYPE-C interfaces into dual- outputs, with red as the right channel output and black as the left channel output.</p> <p>The output end can be connected to the XLR input port of power amplifier, active speaker and stage sound.</p> <p>Note that this product is a one-way conversion. USB TYPE-C can only output signals to XLR. XLR ports can be connected to XLR input ports of power amplifiers, active speakers and stage stereos mentioned above, but cannot be connected to microphones.</p> <p>This cable adopts Y-shaped branch design, and the branch is about 50CM away from XLR plug.</p> <p>This cable uses a 32-bit\/384-kHz decoder chip. Compared with the 16-bit or 24-bit chips used by peers, this cable has the advantages of higher chip sampling rate, finer sound, greater driving force and higher signal-to-noise ratio.</p> <p>Output parameter</p> <p> 32BIT 384KHZ</p> <p>DNR@1KHz -60dBFS Typ: 100dB</p> <p>+N @1KHz 500mVrms Typ: -85dB</p> <p>Crosstalk@1KHz 0dBFS Typ: -80dB</p> <p>The dormant current: 1.5-2ma.</p> <p>Standby current: 25-35 mA</p> <p>Working current: 40-50ma.sc</p> <p>Output adaptation impedance: 8-32 \u03A9</p> <p>(Output Level): 530-630mv</p> <p>(FrequencyRange): 20-20Khz</p> <p>(+N): -90 -80DB</p> <p>(SNR): 95-105DB</p> <p>(DNR): 95-105DB</p> <p>(Crosstalk): -90-70DB</p> <p>Colour:Black \u0026 Red</p> <p>Material:plastic</p> <p>size:2 meter</p> <p>Package Contents:</p> <p>1 * Cable</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>