features: 1. Support CAN2.0A (standard ) and CAN2.0B (extended ) 2. Support CAN communication rate range: 5kbps~1Mbps, can customize CAN rate 3. Four working modes are supported: normal mode, loopback mode, silent mode, and silent loopback mode 4. Support multiple CAN data transmission modes: single transmission, multi transmission, manual transmission, timed transmission and cyclic transmission 5. Support multiple CAN data receiving methods: it can be configured to receive only the data with the specified ID, or specify the ID to automatically respond to the configured data Support sending and receiving CAN data saved as or EXCEL Support CAN bus detection to facilitate viewing CAN bus status The data display of CAN transceiver is provided with time identification, which CAN be displayed in sequence or refreshed Support to set the communication rate of USB virtual port (9600~2000000bps), the default is 2000000bps Support the setting of working parameters through configuration software or serial port instructions, which can be saved in case of power failure Adopting STM32 chip scheme, the communication is stable and On board (transient voltage suppressor), which can effectively suppress the surge voltage and transient voltage of the circuit The upper computer software in Chinese and English in Windows version is provided, which is easy to use It supports secondary development and only needs to process the sending and receiving commands Specifications: Product name: USB to CAN adapter Material: PCB+metal color: blue Model: USB-CAN-A Chip: STM32F103 Interface: USB Range of CAN communication rate: 5kbps~1Mbps Support system: support Windows XP/7/8/10/11, OS for pberry, for Nano and other Linux , and support secondary development Size: 79.78 x 14.5mm Package Contents: 1 x USB to CAN adapter 1 x USB cable 1 x Screwdriver Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.