Upa Usb Programmer Diagnostic-tool Upa-usb Ecu Programmer Upa Usb V1.3 With Adapter For 2013 Versio

NOK 574,00
GRATIS frakt

Upa Usb Programmer Diagnostic-tool Upa-usb Ecu Programmer Upa Usb V1.3 With Adapter For 2013 Versio

  • Merke: Unbranded
Solgt av:

Upa Usb Programmer Diagnostic-tool Upa-usb Ecu Programmer Upa Usb V1.3 With Adapter For 2013 Versio

  • Merke: Unbranded
Veiledende pris: NOK 749,00
Pris: NOK 574,00
Du sparer: NOK 175,00 (23%)
Solgt av:
NOK 574,00
GRATIS frakt

På lager

Vi godtar følgende betalingsmetoder

Beskrivelse

Simply connect the motherboard of the UPA programmer directly or using a DB9 male / female extension cable (1: 1) Insert the correct configuration key into the slot on the main board and start programming via ZIF or DIP female You can also use the included DIL to 10 flat ribbon pins, place it inside the ZIF plug and connect a or clamps for the use of ISP from there. MCU. Choose the adapter you want to use, connect the flat cable for the adapter (PIN1 is always indicated on both the cable and the adapter) and also on the 10-pin ISP connector on the main board.Select the VCC supply source via the bridge on the main board to the ISP connector (on = target upa supply ... off = target has its own supply). Slide the adapter over the soldered PLCC MCU on the target PCB. (No welding, no pinout revision, no pin counting, saves a lot of time and problems and allows your work to be faster, more accurate and easier). Once your workshop is equipped with our set of adapters, you will have a new UPA experience.STMicroelectronics :ST62-40/45/49; NSCCR16-HCS5(9)/MCS5(9)/MES5(9)/MFS5(9)/MCT5(9)/HCT5(9)for : PIC12F-508/509/629/675,PIC16F-627(A)/628(A)/648A/72/73/74/76/77/818/819/83/84(A)/870/871/872/873(A)/874(A)/876(A)/877(A)for :MC68HC05-B6/B8/B16/B16/B32/E6/E6/H12/L28/P3/P3*/X16/X32MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A, MC68HC11/A1/A8/E9/EA9, MC68HC11-E20/F1/K4/KA2/KA4/KG4/KS2/KS8/L6/P2/PA8/PH8MC68HC912-B32/BE32/D60/D60A/DC128A/DG128/DG128A, MC9S12-D64/A128/DG128/DG256/H128/H256Atmel 8051 Architecture: AT89S-51/52/53/8252/8253Atmel AVR 8-Bit Risk: AT90S-1200/2313/232/2333/2343/4433/4434/8515/8535, ATmega-8/16/161/162/163/323/64/103/128, ATtiny-12/15/2313EEPROMs: 24C-01/02/04/08/16/32/64/65/128/256/512, 85C-72/82/92, BAW574252, -003/004/005, KKZ-06F, MCM2814, PCA8581, PCF85-81/82/94/98/102/116, SDA25-16/26/46, X24C-00/01,7002, 93C-06/14/46/56/57/66/76/86, 93S-46/56/66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46EEPROMs:M35080, 25C-010/020/040/080/128/160/256/320/640, M25P-05/10/20/40/80, ST950-10/20/40/80, ST95-160/320/640, ST95P-02/04/08, X50-43/45CXK-1011/1012/1013, M6M800-11/21/41, SDE2506, TC89-101/102*EEPROM Only ..uDP780-828A/948/949/973/974TMS...TMS370CX-02/32/36/42/56,78K0/HC912TMS370CX58 78K0/HC912 TMS375C006colour: red + green + blueMaterial: plastic +metalPackage Contents:1x UPA programmer1x USB cable1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socketOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo-ID: 216931828-462494327
  • EAN: 5114806552191

Levering og retur

Sendes i løpet av 2 dager

  • EXPRESS: GRATIS - Levering mellom kl tor. 16 oktober 2025–man. 10 november 2025 - GRATIS

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur