Item Type: Drum Rim Microphone Clip Material: Metal Drum Clamp Length: Approx. 16.5cm / 6.5in Width: Approx. 2.45cm / 1in Size: Approx. 4cm / 1.6in How to Use: 1. Loosen the support knob, insert the lower fixing rod of the swing arm into the slot and tighten it 2. Unscrew the microphone chuck at the front end of the swing arm, use a coin into the card slot to unscrew the above conversion screw, and install the knob on the front end of the swing arm. Connect the connection port of the stabilizer to the conversion screw and tighten it 3. Pull the microphone cable, insert the microphone into the stabilizer, and then connect the cable. Note: Different types of stabilizer and connecting frames are slightly different, but the principles are the same. 1Special bracket for drum microphone, the main body is made of metal material, the structure is simple and durable 2Can be directly mounted on the edge of the jazz drum, which is very convenient to install and has a good shock-proof effect 3The height and direction of the microphone can be adjusted appropriately, eliminating the need for the original bracket 4Not only saves space, but also enables the drum microphone to achieve good sound pickup 5Drum rim microphone clip is made with excellent craftsmanship, which is beautiful and smooth1 x Drum Rim Microphone Clip