Features Stable Operation: The driver adopts the current loop subdivision control of the driver, the motor torsion ripple is small, the low speed operation is very stable, and there is almost no vibration and noise. Voltage and Current: The dynamic voltage of the two-phase hybrid stepping motor is 12-48V, the current is less than 5A, and the outer diameter is 35-86mm. Safety Protection: The stepper motor driver has overvoltage, undervoltage, overcurrent, and short circuit protection, so there is no need to worry about safety hazards. Wide Range of Applications: The stepper motor driver is widely used in engraving machines, CNC machine tools, packaging machinery, etc. Notice: There must be 20mm space around, and it should not be placed adjacent to other heating equipment to avoid dust, oil mist, corrosive gas, excessive humidity and strong vibration. Specification: Input Voltage: DC 12-48V Input Input: 1-5A Current, Select Drive Stepper Motor Output Current: 0.2A-5A Temperature Operating Temperature: -10-45℃;Storage Temperature -40℃ -70℃ Set the Number of Steps Per Motor Step for the Motor 200, 400, 1600, and 3200 Steps. Power Interface: 1. DC +, DC-: Connect the drive power DC +: DC Power Supply Level, Power Supply Voltage Dc 12 To 48v, Maximum Current 5a DC-: DC Power Supply Negative Level. 2. A + A-B + B-: Connecting Two-Phase Hybrid Stepping Motor The connection between the driver and the two-phase hybrid stepping motor and the four-wire system, the parallel and series connection of the motor windings, and the connection method, the high-speed performance is high, but the driving current is large , when the driving current is equal series connection when the motor winding current Troubleshooting: State Light Indication RUN: The Green Light Works Normally. ERR: Red Light, Power, Indicator Light, Power Indicator Control Signal Definition: PUL +: stepping pulse signal input side or positive pulse signal input positive terminal PUL-: Negative input of negative input pulse signal or positive pulse signal DIR +: input the positive direction step direction signal or input positive terminal negative pulse signal DIR-: Negative terminal for step direction signal input or reverse pulse signal input in negative direction EN +: Offline can reset the signal input EN-: Offline resettable signal input negative Package List: 1 x TB6600 Stepper Motor Driver Package List 1 x TB6600 Stepper Motor Driver