Tech2 Vehicle Chassis Power System Inspection Scanner, US Plug 1. Language: English 2. COMPATIBLE software with powerful and comprehensive testing capabilities for testing powertrains, bodywork, and chassis 3. Upgradable hardware ensures the instrument remains current 4. Large screen with bright backlight 5. RS232 and RS485 ports for connecting to a computer or other instruments 6. Stores and replays fault codes, locks data boxes, and fault logs 7. Allows viewing of vehicle diagnostic test status during road tests 8. User-friendly button layout for easy operation 9. Uses a 32MB card for large capacity and easy upgrades 10. Connects to a CANdi module for testing vehicles equipped with a CAN system (optional) 11. Technicians can use the maintenance programming system to reprogram and configure the computer on vehicles manufactured after 1993. This requires a computer, Tech2, and the maintenance programming system CD-ROM. Operation steps are as follows: 1. Power on the instrument. The instrument will enter self-test mode, and the screen will display "SYSTEM INITIANLIZING" for approximately 4 seconds. The instrument will beep once, and the screen will display the instrument version information. 2. Press the Enter key to enter the main menu. The screen will display: F0 - Diagnostics, F1 - Service Program System, F2 - Display Capture Data, F3 - Tool Options, F4 - Enable. 3. Use the up and down cursor keys to select the target and press the Enter key to confirm. 4. Select the F0 function to enter the vehicle specifications option. Use the cursor keys to select the model year. Press the Enter key to enter the vehicle system, select the appropriate type, and press the Enter key again to enter the system selection menu. The screen will display: F0 - Engine Power, F1 - Body, F2 - Chassis, F3 - Diagnostic Circuit Check. 5. Move the cursor to F0 and press Enter to enter the engine type selection. You can choose between the 3.2L V6G8 and 3.1L V6L82 models. Select the former and