Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Dock Kit

NOK 624,00
+ NOK 64,49 i frakt

Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Dock Kit

  • Merke: Unbranded

Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Dock Kit

  • Merke: Unbranded
Veiledende pris: NOK 1 149,00
Pris: NOK 624,00
Du sparer: NOK 525,00 (45%)
Solgt av:
NOK 624,00
+ NOK 64,49 i frakt

På lager

Vi godtar følgende betalingsmetoder

Beskrivelse

Tang Primer 25K is a core board with a very small package (23x18mm) designed based on GW5A-LV25MG121, and is equipped with a 25K Dock baseboard with full pin lead-out (except MIPI high-speed pins). Tang Primer 25K core board is a compact and highly integrated FPGA core board. It integrates Gaoyun GW5A-LV25MG121, 64Mbit SPI FLASH, DC-DC power supply and BTB connector in an area smaller than a one-yuan coin. The core board leads out 76 GPIOs, 1 hard-core 4lane MIPI line and 3 power outputs for users to use. Users only need to provide a 5V power supply to the core board and correctly set the configuration pins to easily use the Tang Primer 25K core board. Tang Primer 25K Dock baseboard is a of modular baseboard, equipped with an easy-to-use USB-JTAG debugger, 3 PMOD interfaces and 1 40P pin header interface. Users can use the PMOD interface to connect simple modules such as modules, handle modules, and LED modules. In addition, users can also use the 40P pin header interface to connect SDRAM modules, dual camera modules and other modules with more complex functions. Compared with the common FPGA development environment on the market, the IDE installation package required by Tang Primer 25K is less than 200MB in size; the space occupied after installation is close to 500MB, which greatly saves hard disk space. The IDE usage process is extremely streamlined and beginners will not be overwhelmed by too many options. Compared with other IDEs on the market that program in five minutes and integrate in ten minutes, the IDE used by Tang Primer 25K can bring a pleasant experience of programming in five minutes and integrating in only ten seconds. Kit Model:Tang Primer 25K Dock Main Chip:GW5A-LV25(22nm) LUT:23040 BIock RAM:1008kbit :27 x 36 PLLS:6 Clock source:50Mhz Active crystal oscillator SDRAM:Extend 40Pin module 512Mbit with 16bit width External Flash:64Mbit QSPI NOR PMOD:3 Pinout:1x40P (38 GPIO) Onboard Debugger:USB to JTAG & UART Due to different batches, the printed words on the product will be different, which does not affect use. Type:G:Tang-Primer-25K-Dock-Kit Colour:Black Material:PCB Package Contents: 1 * Dock Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo-ID: 314556742-701212833
  • EAN: 4711710911666

Levering og retur

Sendes i løpet av 3 dager

  • STANDARD: NOK 64,49 - Levering mellom kl ons. 01 oktober 2025–fre. 10 oktober 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Nan Chang Shi Xue Ran Shu Ma Ke Ji You Xian Gong Si
  • Nan Chang Shi Xue Ran Shu Ma Ke Ji You Xian Gong Si
  • Qing Yun Pu Qu Jie Fang Xi Lu 49hao
  • Ming Zhu Guang Chang Bdong 1805shi
  • Nan Chang
  • China
  • 330000
  • smilingsungift@outlook.com
  • 15360170853

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr, 56
  • Duesseldorf
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698