SVP-916 VOLTAGE RELAY PROTECTION 63A Functions: 1. The protector has over voltage protection, under voltage protection and other functions 2. The main feature is that the line has overvoltage or undervoltage, overcurrent condition, the product can cut off the power supply immediately, protect the electrical equipment from damage; When the mains voltage returns to normal, the protector can automatically and normally 3. It is mainly used to protect against overvoltage, undervoltage or overvoltage in the distribution line of a home box or to protect single-phase electrical power equipment. 4. Suitable for single phase AC 230V, 50 / 60Hz, rated operating current 63A and below users or loads 5. Low energy consumption and long mechanical life Specification: rated voltage 230VAC 50/60Hz rated voltage 1-63A adjustable (63A by default) / 1-40A adjustable (40A by default) Surge protection value range 221V-300V-OFF adjustable (default 280V) Surge recovery voltage mediation range 220V-299V (default value 250V) Overvoltage protection operation time 0.1s - 10s (default 0.1s) Undervoltage protection value range Adjustable 219V-150V-OFF (Default 160V) Undervoltage recovery voltage mediation range 151V-220V (default 180V) Undervoltage protection operation time 0.1s - 10s (default 0.1s) Overcurrent adjustment range 1-63A (63A by default) / 1-40A (40A by default) Overcurrent operating range 0.1s -512s (default 5.0 seconds) Disaster recovery delay time 2s - 512s (default 60 seconds) Power-on delay time 2s - 255s (default 2 seconds) Energy consumption 2W Electrical and mechanical life 4000 times Installation method DIN rail Working environment Temperature: -25 40 Humidity:<90% Altitude: no more than 2000m Size: Approx. 81 x 36 x 60mm / 3.2 x 1.4 x 2.4 inches Style: 63A Package List: 1 x Protective pad Note: 1. The line conductor should meet the appropriate current standard, and the load current must not be greater than the maximum value of the protective current of the arrester. 2. The neutral conductor N must not be connected incorrectly and must be protected. The N zero line of the protector is directly connected and has no disconnection function. 3. After turning on the product, do not touch live parts to avoid electric shock. 4. This protector has no insulation and no short circuit protection. Use the small circuit breaker on the front to protect against isolation and short circuits. Disconnect the front breaker when repairing the circuit. If MCB protection is not used, the short-circuit current cannot be interrupted in the event of a short-circuit on the protection input or output. 5. Since the protector has a self-resetting function, after overcurrent protection and disconnection of the protector, immediately disconnect the load of the electrical appliance and check the circuit of the circuit, otherwise the protector will turn on the load electrical appliance frequently, which will ultimately be caused to long-term frequent switching on and off to damage the electrical appliance and itself protector. 6. Attention! When the undervoltage trip time is greater than 0.3 seconds, the protection does not open after power failure. (MCU power failure does not work after 0.3 seconds of power failure) 7. When the overcurrent exceeds 5 times within the specified time, the protective interlock will not restore power automatically. You need to manually press "SET" to unlock the power supply, which can effectively protect the frequent opening and closing caused by not releasing overcurrent in time. Device damage.