M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more._x000D_ It boasts a 1.14-inch TFT screen with a resolution of 135 x 240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities._x000D_ M5StickC PLUS2 facilitates the rapid prototyping of IoT products, streamlining the entire development process. Even beginners in programming can easily build interesting applications and apply them to real-life scenarios using M5StickC PLUS2._x000D_ Power on:_x000D_ Wake up can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again._x000D_ _x000D_ Power off:_x000D_ When there is no USB external power supply, press "BUTTON C" for more than 6 seconds; Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off._x000D_ Features:_x000D_ ESP32-PICO-V3-02-Base,support WiFi_x000D_ Built-in 6-Axis IMU_x000D_ IR transmitter_x000D_ Microphone_x000D_ RTC_x000D_ Buttons, LCD(1.14 inch)_x000D_ Built-in Lithium Polymer Battery@200mAh_x000D_ Extendable Socket_x000D_ Built-in Passive Buzzer_x000D_ Wearable & Wall mounted_x000D_ Applications:_x000D_ Internet of things terminal controller_x000D_ Wearable devices_x000D_ Stem education product_x000D_ DIY creation_x000D_ Different batches may have different appearance, which does not affect use._x000D_ Color: yellow_x000D_ Material: ABS_x000D_ _x000D_ Package Contents:_x000D_ 1 x StickC PLUS2 IoT Development board_x000D_ _x000D_ Only the above package content, other products are not included._x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_