Model: Gear cable tie toolSize: 4.6 to 24 mm steel belt and thickness less than 1.2 useMaterial: Steel Specialthickness: 30 mmFire classification: AAAScope: Tightening the steel beltFunction disconnection, tightening lineForm a flat mouthApplicable objects: pipe, cableThe characteristics tighten the materialSpecial steel handle materialWeight 1600 (G)Specification 25 (mm)Field of application: railway bridge frame, signaling, municipal administration, etc.box packingManual clamping methodHow to use1. Add 10 to 15 cm depending on the circumference of the object, exit it from the cable clamp and cut it2. After putting the loop, turn the ties inside the back of 3 to 4 cm to buckle the loop3. Insert the other end of the cable clamp into the groove of the cherry roll after placed on the bound object4. Hold the belt tightening machine with the left hand and rotate the gear key from front back with the right hand until the clip is tight5. Push the belt tightening machine up to support against the6 loop. Pull the knife handle with the right hand to cut the cable tie and remove the tightening machine7. Use a hammer to hit the ear-shaped clip of the loop to complete theFastener Please allow a slight deviation in the measurement data and make sure that does not bother you before ordering.High quality store for you