List of compatible models1.Ford Mendeo 2013-20182.Ford Fusion 2013-2018The kit will retain the original panel control panel circuit board, and the heat dissipation board of Android host needs to be installed separately. You can ask customer service for technical information about the installation processProduct introductionFrame partAdaptive host screen size: 9.7 inchApplicability: it is used to be compatible with the models in the above model list and converted into Android large screen intelligent car multimedia navigation sound With the special harness in the kit, it is convenient to replace the original radio and sound systemMaterial: environment friendly ABS plastic, no odor and anti-aging. Set screw M3 × 8 self tapping screws.Application: 1:1 model design of the original radio installation part, complete modification kitDesign: easy to install, suitable for car multimedia DIY refitting for professional merchants and individual buyers.If you need to develop a new bus protocol decoder or purchase in large quantities, please contact our customer service to negotiate further matters Harness and decoding partThe harness is used for car audio, car navigation, common public car Android solutions that meet the pin definition of the standard, and the main power line interface is 16pinAccording to the standard design of the original vehicle, there is no need to cut any wires, and the plug to plug installation is simpleThe products have been tested and tested for 100% electrification performance and other indicatorsFor the harness with CANbus protocol box, you need to enter the factory setting of Android host and select the corresponding CANbus brand and model in the car bus configuration menu. It is recommended to update the latest MCU and configuration file when connecting WiFi to the Internet. It is also recommended to install under the guidance of professionals or experienced persons.It is recommended to use Android hosts with mainstream solutions such as Topway xyauto nowada ftytek. For some decoders, they can only be compatible with the products of designated solution providers, we will inform them in the special instructions.If you need to develop a multimedia frame mold for a new model, please contact our customer service to negotiate further matters window.adminAccountId=2677058412;