Features: 1. The for Radxa adopts the for W form factor, 2. However, due to the use of the Amlogic S905Y2 -core -A53 processor with a main frequency of up to 2.0 GHz, 3. Higher performance, which Radxa says is equivalent to about 70% of the CPU performance for . 4. The Arm Linux board is equipped with up to 4GB of RAM, 16GB of eMMC flash memory, and an AP6212 or AP6256 wireless module. 5. Plus all the ports for the W, with a twist, the mini -compatible port is replaced by a --compatible port, and the USB-C port is used of the -USB port. Specification: model: LPDDR4 RAM 1GB, WIFI4/BLE4, no eMMC Product Details: -Amlogic S905Y2 64-bit -core processor - - -A53, frequency 1.8Ghz, 12nm CPU: G31 MP2 GPU, supports OpenGL ES 1.1 /2.0 /3.1 /3.2, 1.1, Open 1.1 1.2, 2.0 full profile Memory LPDDR4: 64bit dual channel LPDDR4@3200Mb/s Wifi/BT Antenna: Wifi/BT with external antenna support, different models WIFI4/BLE4 and WIFI4/BLE5 Storage eMMC 5.1: Soldered high-performance eMMC 5.1 with 8GB/ 16GB capacity -SD card: USD slot supports up to 128G uSD card Display_ --compatible: -compatible 2.1, 4K@60 HDR Peripherals: HD codec H265/VP9 decode 4Kx2K@60 USB 3.0 Type-C x1: USB 3.0 ; dedicated USB3.0 channel USB2.0 Type-C OTG x1: USB 2.0 OTG Network (depending on model) ---Wireless 802.11 abgn wifi 2.4GHz, Bluetooth 4.2 ---Wireless 802.11 ac wifi 2.4/ 5GHz, Bluetooth 5.0 IO 40-pin expansion header: - 1 x UART - 2 x SPI Bus - 2 x I2C Bus - 1 x /I2S - 1 x SPDIF - 1 x PWM - 1 x - 1 x GPIO - 2 x 5V DC power in - 2 x 3.3V power pins Product size:65 x 30 x 5mm (same as W for ) Material: PCB+Metal colour: green Package Contents: 1 x for Radxa development board Only the above package content, other are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.