Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

NOK 899,00

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Merke: Unbranded
Solgt av:

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Merke: Unbranded
Pris: NOK 899,00
Solgt av:
NOK 899,00

Ikke tilgjengelig for øyeblikket

Vi vet ikke når eller om denne varen kommer tilbake på lager.

Vi godtar følgende betalingsmetoder

Beskrivelse

Oxygen Inhaler Wall Entry Buoy Type Oxygen Filter Flow Meter Meter Oxygen Supply Parts Item Type: Oxygen Inhaler Flow Range: 1~10L/min, 1~15L/min Input and Output: 0. 4MPa~0.5MPa Exhaust Pressure of Safety Valve: 0.17MPa±0.05MPa How e:1. When using the inhaler, fill the inhaler bottle with distilled water first. It is forbidden to replace it with physiological saline. The water level in the inhaler bottle is between the upper and lower water levels. Tighten the inhaler bottle. 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, and then insert the quick plug into the oxygen supply terminal socket hole. When you hear a "click" sound and see the oxygen supply terminal socket locking sleeve automatically slides , It means that the quick plug and the oxygen supply terminal socket have been connected and locked 3. Before supplying oxygen, insert the oxygen inhalation tube (purchased separately) into the oxygen supply connector, and then turn the flow adjustment switch counterclockwise to turn on the air source to make the float rise slowly (the scale line aligned with the center of the float is the flow reading, unit Is liters/min), the oxygen supply can be adjusted as needed 4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidification bottle should be unscrewed, and distilled water should be added according to the requirements of Article 1 of this item. Screw on the body of the inhaler and continue oxygen supply. 5. When the inhaler is out of use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with one hand and unlock it with the other hand and then remove it (the unlocking method of the different oxygen supply terminal sockets is explained by the engineering installation unit ). Then pour out the water in the bottle for cleaning and disinfection, and store it in a non-corrosive gas and well-ventilated room.
  • Fruugo-ID: 413728961-874299789
  • EAN: 4081337801405

Levering og retur

Sendes i løpet av 24 timer

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659