New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

NOK 574,00
+ NOK 177,49 i frakt

New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

  • Merke: Unbranded
Solgt av:

New Pn532 Nfc Rfid Module V3 Kits Reader Writer Board For Android Phone

  • Merke: Unbranded
Veiledende pris: NOK 1 149,00
Pris: NOK 574,00
Du sparer: NOK 575,00 (50%)
Solgt av:
NOK 574,00
+ NOK 177,49 i frakt

På lager

Vi godtar følgende betalingsmetoder

Beskrivelse

We've taken our popular PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The mini NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from for NXP) or other more advanced features at this for time. NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range Bluetooth-compatible that doesn'for t require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC.Because it can read and write tags, you can for always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other for NXP for MiFare type tags) The mini shield was designed by RF engineers using the best test equipment to create a layout and antenna with 5cm range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier. This shield is designed to use I2C or SPI communication protocols. SPI is the default, It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. for any "classic" NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas. Size: See the picture No retail package Quantity: 1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item.
  • Fruugo-ID: 251410679-544090438
  • EAN: 563854306716

Produktsikkerhetsinformasjon

Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Sikkerhetsadvarsler: Warning: Please read the product instructions carefully before use to ensure correct use.

Levering og retur

Sendes i løpet av 2 dager

  • STANDARD: NOK 177,49 - Levering mellom kl ons. 15 oktober 2025–tor. 23 oktober 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Shenzhenshiantuwokejiyouxiangongsi
  • Shenzhenshiantuwokejiyouxiangongsi
  • Longhuaquminzhijiedaoxinniushequminzhidadaoniulanqiandashac1508
  • Shenzhen
  • China
  • 518083
  • antuwo18665307437@outlook.com
  • 8.62E+11
  • https://www.fruugo.co.uk/shenzhenshiantuwokejiyouxiangongsi/m-20620

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • None
  • JIANZHOU LIU
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen, Deutschland
  • Frankfurt am Main
  • DE
  • 60329
  • E-CrossStu@web.de
  • 4.97E+12
  • https://www.fruugo.co.uk/shenzhenshiantuwokejiyouxiangongsi/m-20620