Proximity Sensor Inductive Magnetic Sensor DC 5-30V Inductive Distance 10mm For Machine Tool Automation Devices~9023

NOK 1 049,00
GRATIS frakt

Proximity Sensor Inductive Magnetic Sensor DC 5-30V Inductive Distance 10mm For Machine Tool Automation Devices~9023

  • Merke: Unbranded
Solgt av:

Proximity Sensor Inductive Magnetic Sensor DC 5-30V Inductive Distance 10mm For Machine Tool Automation Devices~9023

  • Merke: Unbranded

NOK 1 049,00

På lager
GRATIS frakt
Solgt av:

NOK 1 049,00

På lager
GRATIS frakt

Vi godtar følgende betalingsmetoder

Beskrivelse

10 set oacute;w proximity sensor NPN non-magnetized inductive sensor with gasket NK-5003C 1. Complete accessories: including 10 set oacute;w sensor oacute;w equipped with magnet oacute;w sheets, washers and nuts, high practicality. 2. Nickel-plated brass: using nickel-plated brass material, it has good conductivity and strong anti-disturbance ability. 3. With Sensor Chip: The ABS probe has a built-in intelligent sensor chip, which has a fast frequency response and induces induction near metal objects. 4. With indicator: with signal indicator, when a metal object is detected, the light turns on normally, and when the light is turned off, it is normally closed. 5. Multiple applications: NPN without output mode, suitable for industrial assembly lines, machine tools and automation equipment, etc. Specification: Item type: proximity sensor Product material: ABS + brass Product model: NJK-5003C Supply voltage: DC 5-30V Current rated: 300MA Output mode: NPN no Induction distance: approx. 10mm/0.4in Product length: approx. 1.2 meter/3.9ft Nut size: M18 Product quantity: 10 set oacute;w Product size (not including cable length ): M18x42mm Scope of application: assembly lines, machine tools, automation equipment etc. Package list: 10 x sensors 20 x gaskets 20 x nuts 10 x magnet sheets Note: 1. The current sensor must select the products with different specifications according to the rated effective value of the measured current. 2. If the measured current exceeds the limit for a long time, it will damage the end-pole amplifier tube (with respect to the magnetic compensation type). Under normal conditions, the duration of 2 times the overload current should not exceed 1 minute.
  • Fruugo-ID: 286520660-639129612
  • EAN: 6902735984478

Levering og retur

Sendes i løpet av 24 timer

  • STANDARD: GRATIS - Levering mellom kl man. 03 november 2025–man. 10 november 2025 - GRATIS

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur