1. Select The Correct Brand For Remote To Be Programmed By Moving Dip Switches Up Or Down. For Example 433,92Mhz Remote Controls, Just Move Dip-Switch 7 Up. 2. Press The Learn Button. The Will Led Turn On. 3. Press The Button On The Remote, The Led Flashes 4 Times. It Means That Remote Control Was Programmed Successfully. 4. Repeat For Another Button. 5. The 2-ND Channel Programming Procedure Is The Same. Erase All Data From The Memory Card: Press And Hold Either Learn Button. The Led Will Start Flash. Keep This Button Pressed, Until The Led Will Turn Off. All Saved Data In The Memory Card Will Be Erased Permanently And Can Not Be Recovered Compatible :All 433.92Mhz Fixed Code Remotes. Load Power: 5KW Working Current: less than equal 10A Working Voltage: DC12V Control Distance: 50m Control Type: Radio Frequency Control Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Type:1-to-1 set Colour:As Shown Material:ABS Package Contents: 1 * Receiver 1 * Remote Control Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.