1. Feature-rich, easy to program for beginners or not. 2. Maximum 40 channels can be controlled. 3. Supports 5 CHASE effects, each effect can be up to 50 single steps. 4. With power failure memory, power on automatically enter the mode of operation before power failure; When the fixture address setting is aligned to 8CH, it can realize the function of lifting the l Battery-powered, easy to use, no need to search for the fixtures. 5. Battery-powered, easy to use, eliminating the need to search for 220V, and compatible with TYPE-C port, which is the common charging method for cell phones. Buttons with luminous prompts, the operation status is clear at a glance. Power input: 90-240V 50-60HZ TYPE-C plug: 5V-2A Rated power: 10W Capacity: 2600mAh Battery life: 6 hours Charging time: 2 hours Programming Process Introduction: 1. In the idle state, press and hold the CHASE button to enter programming mode. 2. All 5 keys in the light selection area light up. 3. Select the corresponding press to indicate the CHASE number to be programmed. 4. The single-step editing state is entered. 5. Push the fader to set the single-step scene effect, similar to the manual mode operation. 6. Press UP to save and move to the next step edit. 7. Repeat step 5. 8. After editing all the steps, press MANUAL to exit the programming state and finish saving. Colour:Black Material:plastic Package Contents: 1 x Console 1 x Charging cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.