1.It is a series resistor inside capacitor, using 100kHz to remove the impedance 1 or (2xpixFxC). 2.The impedance become small, and we can then measure the true series resistor value.,Using this , we can measure the capacitor is bad or damaged or good in condition. 3.Our meter only applies less than 15mV DC or to on a good capacitor, as a result we can use it as in circuit test. 4.During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not. 5. terminal, for fast and easy inspect general capacitor or resistor, a printed table for fast check. Range Accuracy(After zero, Refresh Time(Manual Mode) tested with 1,10,100R Auto mode take 0 to 2s, more time resistor) depends on capacitance value. 0.000 to 1.000R 1 percent and2Digit -0.4s 1.000 to 10.00R 1 percent and1Digit -0.4s 10.00 to 100.0R 2 percent and1Digit -0.4s Accuracy: Up to 1 percent (detail on above table) Wide Measurement Range: Greater than 1uF High Resolution: 4 digit, or 0.001Ohm 1 range Measuring voltage: Less than -40mV (TESTING VOLTAGE) External : 5V Mini USB Operating Current: 0.02A Battery: 2 x AA 1.5V Battery (not included) Battery Life time: Greater than 80 Hours size:14.5 x 8 x 3cm Material:ABS and electronic components colour:black Package Contents: 1 x Capacitance Meter 2 x Test Clips 1 x User Manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.