Beskrivelse
M3 HUD FOR ALL CARAuto Projector Head Up Display
1.Multifunction: Speed, Water temperature, Voltage2.
Short Press-
To switch voltage, water temperature,vehicle speed,enter into menusetting to switch menu options or parameter values
Long Press-
To enter into menu settings (see instructions for Menu 1-12) and press 5 seconds to save and exit3.
Short Press-
Menu - and parameter valueLong Press-
To turnon andoff the buzzer(default choice is buzzer on,you can freely choose to turn on or off)4.Engine icon, Water temperature icon 5.Voltage icon, Fatigue driving icon
6.Speed unit: MPH- mile7.KM/H- kilometer8.OBD connection port
9.
Short Press-
Menu + andparametersvalue +
LongPress-
Long press till the screen is all on, and the fault code is eliminated, long press again to exit10.
Power switch-
Long press for 5sto turn off,again to turn on1.
Satellite icon
: After the satellite is found, it stops flashing and goes out before it can be used normally2.
Light sensor
:HUD can automatically adjust the brightness according to the environment3.
Short Press-
To switch voltage, water temperature,vehicle speed,enter into menusetting to switch menu options or parameter values4.
Short Press-
Menu - and parameter valueLong Press-
To turnon andoff the buzzer(default choice is buzzer on,you can freely choose to turn on or off)5.
Buzzer6.
Compass
: N (North) E (East) W (West) S (South)7.
Vehicle speed display
: display the current vehicle speed8.
Speed unit
: MPH- mile, KM/H- kilometer9.GPS connection port10.
Short Press-
Menu + andparametersvalue +LongPress-
Long press till the screen is all on, and the fault code is eliminated, long press again to exit
11.
Power switch-
Long press for 5sto turn off,again to turn onCAR SPEEDOMETER m3 it will automatically alarmif overspeed so it can save youfrom looking down the speedometer and drive safely.LIGHT SENSORhud can automatically adjust the brightness according to the environmentEASY INSTALLATIONEasy to install plug and playOBD2 EOBD HUD HEAD-UPDisplay Windshield Digital.Car Speed Projector On-BoardComputer Fuet Mileage AlarmGPSHUD HEAD-UPMulti functions display clock battery voltage altitude satellite numbers,mileage,trip timeLIGHT SENSOR
: HUD can automatically adjust thebrightness ccording to the environmentMILEAGE UNIT
:TRIP means the driving distance from engine start to offFOR ALL CARPerfectly compatible with vans trucks buses cars off-road vehicles SUVs and other vehiclesGPS SYSTEM:
Use a USB cable to connect to the car cigarette lighter interface.
FQA:
How to Install the HUD Car Computer:
1. Insert the product into the check port on the vehicle OBD computer;
2. Insert the other end of the product into the data interface of the host;
3. After the product is inserted into the host and the car is started, wait for the communication linkage between A202 and the car;
4. After the linkage is successfully established, the host will send a drop"sound, at the same the display screen displays vehicle protocols and then indicates that it is the first time the product is used to set up parameters. (International universal OBD plug protocol definitions stipulated by SAE).
Common problem:
Q1: Why does it automatically turn off after a period of time?
A1: Its default sleep time is 30s, So when your engine is turned off, it will automatically turn off after 30s .please choose Sleep Time Set"to set the sleep time.
Q2: Why my car dashboard lights or fault alarm lights are caused to be lit up abnormally?
-
Fruugo-ID:
200058101-425906512
-
EAN:
970907631334
Produktsikkerhetsinformasjon
Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor
Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.
Produktsikkerhetsetiketter
Sikkerhetsadvarsler:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
