Item Type: Lidar Range Finder Sensor <br>Material: ABS + Printed Circuit Board <br>Function: Assist focusing, elevator projection, intrusion detection, material level measurement. <br>Measuring Range: Approx. 0.2 ~ 8metre / 0.7 ~ 26.2ft (at 90% reflectivity) <br>Accuracy: Approx. ±6cm / 2.4in at（0.2 ~ 3metre / 0.7 ~ 9.8ft）±2% at（3 ~ 8m / 9.8 ~ 26.2ft） <br>Distance Resolution: Approx. 1cm / 0.4in <br>Frame Rate: 100Hz <br>Anti-Ambient Light Ability: 70Klx <br>Working Temperature: -10℃~60℃ <br>Light Source: VCSEL <br>Centre Wavelength: 850nm <br>Eye Safety: Class1 (IEC60825) <br>Field of View: 2 Degree <br>Power Supply Voltage: 5V±0.1V <br>Average Current: ≤70mA <br>Power Consumption: ≤0.35W <br>Peak Current: 150mA <br>Communication Level: LVTTL (3.3V) <br>Communication Interface: UART / I2C <br>Size: Approx. 35 x 21.25 x 13.5mm / 1.4 x 0.8 x 0.5in <br>Storage Temperature: -20℃~75℃<br>1、A single?point ranging radar based on the ToF principle, using 850nm infrared light source, ensures stable, accurate and highly sensitive distance measurement. <br>2、Has multiple built?in adaptation algorithms for various application environments and targets, and opens a variety of adjustable configurations and parameters. <br>3、Guarantees excellent ranging performance in complex environments and meet the needs of customers in complex application scenarios, efficient and practical. <br>4、Can be flexibly applied in varied cirmustances, including but not limited to assist focusing, elevator projection, intrusion detection, material level measurement, etc. <br>5、Enables a wide measuring range from 0.2 metre to 8 metre, compatible with for Pixhawk and for Raspberry Pi, and has UART/I2C communication interface as well.The module has UART and I2C interface, UART is the default, if you need to use I2C interface, please set it yourself.<p>1 x Lidar Range Finder Sensor</p><p>1 x Connecting Cable</p>