LED Beauty Machine Massage 7 in 1 Micro Current Skin Rejuvenation Machine 100‑240V US Plug Item Type: LED Light Facial Device Material: ABSLED lights: Red, green, blue, yellow, orange, purple, UVProduct gear: 5 gears Product time: 0-60 minutes Light chips: Mainboard light chips: 68 Left panel light chips: 152 Light chips on the right panel: 152 How e Product settings 1. The location and space of the equipment should be considered before installation, and the installation should be kept away from heating equipment and other medical equipment. 2. Avoid direct sunlight and high humidity, and should be installed in a place with good ventilation and suitable temperature and humidity. Install 1. Open the package, take out the main body of the instrument gently, align the bases on both sides of the instrument with the main body of the instrument according to the bayonet method, assemble it and place it on a stable surface. 2. Take out the power supply of the adapter, insert the DC terminal into the DC connector of the meter, and ensure that the terminal connection is stable. 4. When the machine is not turned on, the time display text on the touch panel of the machine is concealed. Note: The operation mode of this machine is touch button. When you touch the button, there will be a "ding" sound feedback, indicating that the operation is successful. Do not press or tap forcefully. Instructions: 1. Radiation It is recommended to take 30-45min per time (can be adjusted according to individual circumstances). 1-2 times a day, no more than 60min each time, use light in other bands except ultraviolet light: foldable design, can illuminate different parts as needed, and use it in various body positions such as supine, side, sitting, and tummy. Flexible; All parts can be irradiated from head to toe, solving the problem of portability of large equipment. 2. Ultraviolet rays: The top of the spectrometer is equipped with ultraviolet (ultraviolet) light, which is mainly absorbed by epidermal tissues, has significant biological effects on skin and other tissues, and has few adverse responses. 3. Ultrasonic fine spray: The spray of nano units is produced by ultrasonic waves. Tiny water particles penetrate deep into the skin for faster absorption of hydration; diluted products or purified water are recommended. It is strictly forbidden to mix with other high concentration cosmetic water or essential oils; it is better e with the mask. 4. Heat Compression Mode: Heat compress is a physical therapy method. Hot compress therapy plays an important role in soft tissue injury diseases. By deeply heating the skin, it opens pores for easier absorption of nutritional products. The 5 stage temperature is adjustable, and the temperature adjustment range is 45°C-75°C, and the temperature can be adjusted according to individual needs. Two to three times a day for 15 to 20 minutes. Note: 1. Do not use overheated temperature. 2. When using hot compress, check the changes of the local skin at any time. If you feel uncomfortable, you should stop immediately.5. Micro current: Micro current opens micro channels on the surface of the skin and connects with the deep layers inside the skin. Nutrients are delivered to the deep layers of the skin through microchannels, allowing the skin to be deeply nourished. When in use, the positive and negative electrodes need to contact the skin at the same time (or contact the skin through a conductive medium).