5-inch capacitive touch screen, hardware resolution is 800 x 480. Capacitive touch panel, support 5-point touch. Toughened glass capacitive touch panel, hardness up to 6H. Supports Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+. Directly drive the LCD by the DSI interface on the for Raspberry Pi, with up to 60Hz refreshing rate. Introduction: This is a 5inch for Raspberry Pi LCD touchscreen with 800x480 resolution and 108x64.8mm display area. The product supports for Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. The special holes design on the back of the screen is convenient to directly install the for Raspberry Pi in the product. There is no need to provide external power for the touchscreen as the for Raspberry Pi power supply is adopted. In addition, the screen supports hardware backlight adjustment. The function can be realized by turning the potentiometer on the back of the display. When working with for Raspberry Pi, support for Raspberry Pi OS / Ubuntu / Kali and Retropie, driver-free. When working with VisionFive, support Debian, single-point control, and driver-free. When working with for Tinker Board 2, support Linux/Android, five-point control, and driver-free. When working with Core3566, support Debian/Ubuntu, five-point control, and driver-free. Support brightness adjustable through software control. Colour:As Shown Material:Plastic Package Contents: 1 * LCD Touch Screen 2 * Cable 4 * Screws