Specification: _x005f_x000D_ Product Size: 60 * 33 * 15 MM/2.36*1.3*0.6 In _x005f_x000D_ Working Voltage: 12 (V) _x005f_x000D_ Working Current: ≤ 12 (Ma) _x005f_x000D_ Code Type: Duplicate, Copy  _x005f_x000D_ Operating Frequency(Optional): 315/433mhz  _x005f_x000D_ Modulation Mode: Ask (Amplitude Modulation) _x005f_x000D_ Wireless Transmission Distance: 50-100 M/1968.50-3937.00 In (Open) _x005f_x000D_ Scope Of Application: Garage Door, Alarm, Automatic Door, Rolling Shutter Door, Etc _x005f_x000D_ _x005f_x000D_ Can Copy Chip Models: _x005f_x000D_ For 1.For Pt2242, 2.For Pt2260, 3.For Pt2262, 4.For Ev1527, 5.For 527, 6.For Pt2240, 7.For Smc918, 8.For Ht-12e, 9.For Ax5326-3, 10.For Ax5326-4, 11.For Ax5026, 12. For Ht600, 13. For Ht680, 14. For Ht6207, 15. For Ht6010, 16. For Ht6012, 17. For Ht6014, 18. For Mc145026, 19. For Ht640, 20. For Smc926, 21. For Ht12d And Other Fixed Code And Learning Code Wireless Remote Control. _x005f_x000D_ _x005f_x000D_ Operating Instructions: _x005f_x000D_ 1. Clear Code: Press And Hold The Two Buttons On The Front (Above) At The Same Time, The Led Indicator Flashes Three Times, Release Any One Of The Buttons (The Other Is Kept Pressed), Press The Released Button Three Times, The Led Indicator Enter The Fast Flashing State, Indicating That The Code Clearing Is Completed (The Remote Control That Has Cleared The Code, Short Press, The Led Indicator Does Not Light Up). _x005f_x000D_ 2. Duplicate: Hold The Original Remote Control, The Other Is The Duplicator Remote Control, The Two Remote Controllers Are Close To Each Other, Press The Button Of The Duplication, Respectively, The Led Indicator Flashes Three Times And Then Stays On, Indicating Duplication Success, The Other Key Operation Method Is The Same. _x005f_x000D_ 3. Recovery Instructions: If You Have Cleared The Useful Codes By Mistake, You Can Press The Two Buttons On The Back (Below) Of The Controller At The Same Time Before Copying Other Remote Controllers Again. After The Indicator Light Flashes Quickly For 3 Times, It Means The Recovery Is Successful. _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due To The Different Monitor And Light Effect, The Actual Color Of The Item Might Be Slightly Different From The Color Showed On The Pictures. Thank You! _x005f_x000D_ Please Allow 1-2 CM Measuring Deviation Due To Manual Measurement. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 X Electric Rolling Driveway Gate Opener Closer _x005f_x000D_ 1. Advanced RF Technology: Our cloning duplicator key is equipped with a high-performance radio frequency chip and a stable crystal oscillator, ensuring precise frequency targeting for reliable operation. 2. Extended Range and Sensitivity: Boasting a far-reaching transmission distance, the garage gate door opener remote control operates without the need for direct line-of-sight and maintains high sensitivity to prevent signal blockage. 3. Universal Compatibility: The automatic sliding gate opener can swiftly copy most fixed code and learning code wireless remote controls, with a fast copying speed and straightforward procedures, making it user-friendly and efficient. 4. Original Remote Unaffected: After copying, the electric rolling driveway gate opener closer does not interfere with the function of the original remote, allowing for uninterrupted use of your existing setup. 5. Hassle-Free Automatic Pairing: The universal wireless remote control keychain is ready to use immediately after copying with its auto-code matching feature, eliminating the need for complex programming or coding.