Function description: The socket is ordinary converter,with two output 5v2A power uSBpower supply at the same time,can be convenient in use electricalappliances and recharge the equipment at the same time,such as digitalproducts like lphone lpad,MP3,MP4 etc.The charge apply to full range ofinternational AC output,no-load power consumption less than 0.3w,with short circuit,overload,over-voltage protection,can be convenientfor your life and save more energyFeature: ltem Number:TMUSB01. Product Size: 108.5x54x69mm. Max load power: 3680w. uSB port Out Rating: 5V 2.1A. Working voltage:180~260V AC. Voltage frenquency:47~63Hz. Working current:16A. Time Range:Count down 1hour-10hours. lP Level: IP20Operation Temperature: oC to +40Time Accuracy:+-3min. Shortest Switching Time: 1 hourTimer socket with 2 USB ports 5V 2.1A for chargePlug Type:EU Plug,it applies to Indonesia, , , , and so onVoltage: AC220VColor: whiteMaterial: plasticTimer Control Time Adgustment :1. Press the power switch 1 time,the 1HOUR LED will light on.The Timerinto ON mode,uSB and control socket output ON .2. Continuously press the power switch the LED light on,the Countdownmode and LED light on will change from0.25HR,0.5HR,1HR,2HR,4HR,6HR.3. you need countdown time mode,the mode LED will lightoon,start countdown until countdown time finish,the control outputand uSB change to OFF4. Then the countdown is start,The Time indicate LED will from high tolow auto change until Countdown finish off.Failure analysis:1. check whether the power supply connection is good2. check whether the uSB cable is loosenWarning Note:1. Use indoor and dry location ONLY2. The load max does not 16A 3680w3. This product does not convert voltage do not miss use DO NOT the maximum loading of 3680 watts16A4. Always have earth connection for safety reason5. in doubt with a qualified electricianPackage Contents:1 x Timer SwitchOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.