Function: 1. PWM fan hub from 1 do 8: The PC fan controller can connect 2Pin, 3Pin, 4Pin fans to solve the problem of insufficient motherboard interface and provide a better power supply solution for the motherboard cooling fan inside the computer case. 2. Function: 6-pin power supply interface. The controller can power do 8 fans, and the rotary potentiometer can adjust the speed of do 8 fans at the same time. The fan base supports 2Pin, 3Pin and 4Pin fans, and the speed of these three fans can be adjusted. 3. Easy to use: Chassis fan pressure regulator. No driver required, just plug and play. It can be powered directly by a 12V power supply, which can reduce the load pressure of the motherboard. 4. Widely compatible: Works with 2-pin, 4-pin and 3-pin fans. If the wentylator does not support the PWM speed control function, the speed control function is incorrect. The total current connected do of the fan must not exceed the maximum current value of 13A to avoid damage to the regulator. 5. Space-saving: 8-way splitter 12V speed controller. The rotary switch with 30 cm cable can be installed anywhere in the computer case. Comes with double-sided tape that securely holds the regulator inside the case. . CONTROLLER PWM FANS 6PIN PC 12V . CONTROLLER PWM FANS 6PIN PC 12V Specification: Item Type: PC Fan Hub Product Material: Plastic, Metal Supply Voltage: 12V Power interface: 6PIN interface (2x3). Fan Interface Type: 2Pin, 3Pin, 4Pin . CONTROLLER PWM FANS 6PIN PC 12V . CONTROLLER PWM FANS 6PIN PC 12V List of packages: 1 x Housing Fan Voltage Regulator and Extension Cord 1 x Chinese and English User Manual Note: The total current connected do of the fan must not exceed the maximum current value of 13A to avoid damage to the regulator 1. The adhesive pad on the bottom of the regulator can be glued and fixed in the chassis. 2. Make holes in the chassis according to the size shown in the figure, and the potentiometer can be fixed in the chassis hole with nuts. 3. Set the screw posts on the housing according to the size of the circuit board mounting holes as shown in the figure, and fix the regulator on the screw posts. . CONTROLLER PWM FANS 6PIN PC 12V . CONTROLLER PWM FANS 6PIN PC 12V