MaterialsThis high pressure sprayer is made of premium stainless steel with good rust resistance, long service life, pressure resistance and corrosion resistance, exquisite workmanship and durable. clear thread.Product InformationThe fan nozzle tip has a standard 1 or 4" outside connection and a nozzle size of 1.3mm the angle of the jet is of 65 degrees and the flow rate is 0.4-5L or min, suitable for a wide range of pressure washers.Good cleaning results The 65 degree nozzle cleans dirt very well , it sprays water mist under high pressure, so only a small amount of water is needed to clean the stain very thoroughly, which not only saves water, but also meets the cleaning requirements. Warm TipsPlease use a water filter so that the nozzle is not clogged with sand or other impurities. If the nozzle is clogged with sand or other impurities, the nozzle can be removed, cleaned with a needle and then rinsed with water.Wide range of pressure washers such as water brooms , floor cleaners, surface cleaners, dust cleaners, etc. If you have any questions about the product, please first.Product Information: The pressure washer nozzle is easy to install and is a great pressure washer accessory. Material: stainless steel. Colour: silver.Weight: 74 g.Dimensions: 10 x 10 x 25 mmQuantity: 4 pieces. If you have any questions, do not hesitate to . Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.