Type:Integrated Edge Bending Milling Cutter Tool selection: To achieve your desired goal, please make sure to use tools with short cutting edges as much as possible. We recommend using tools with larger handle diameters. Pay attention to protect the eyes, ears, etc. Body, clothing, and other miscellaneous items should not be placed near knives used in work. Tool operation: (1). Woodworking milling cutters are designed specifically for handheld and desktop woodworking carving machines and cannot be used on equipment such as electric drills and drilling machines. (2). Avoid processing metals, stones, and non wood materials. (3). Be sure to use a clamp of the appropriate size, as a clamp with severe wear, insufficient roundness, and tapered holes cannot provide sufficient clamping force, resulting in vibration or twisting of the tool handle and flying off. (4). When uneven contact marks or grooves are found on the handle of the tool after clamping, it indicates slip and deformation of the inner hole of the jacket. The jacket should be replaced immediately to avoid accidents. (5). If is found to have a beating phenomenon during the operation, it should be stopped immediately, and repeatedly clamped several times to that the handle and the clamping sleeve are in full contact before starting to work. (6). The contact between the tool handle and the jacket should be good. The tool handle must be fully inserted into the jacket and tightened firmly in order to provide sufficient clamping force to the tool. Only a small portion should be inserted into the jacket, otherwise it may cause the handle to break and the tool to be . Colour:As Shown Material:Metal Package Contents: 1 x Integrated Edge Bending Milling Cutter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.