1、Signals / Resolutions: The High Definition Multimedia Interface Converter for RetroScaler2x can accept 240p/480i/288p/576i sources for NTSC/ for PAL to converter to 480p/576p High Definition Multimedia Interface output (480p for NTSC,576p for PAL). For example 240p signals are supported properly, allowing for a completely progressive linedouble to 480p. The 480i signals are deinterlaced and doubled also to 480p. Keep in mind that the output resolution of this device only up to 480p/576p. 2、No Lag: The High Definition Multimedia Interface Converter for RetroScaler2x is a zero lag device, proven using multiple measurements and different devices. 3、 Filter Modes: The “FIL” mode is completely preference-based, but the average retro-gamer prefers the FIL mode off for 2D games (for SNES, for Genesis, etc) and on for 3D games (for N64, for Saturn, etc). Also, the “FIL” mode might help reduce flicker with some 480i-only games. 4、 Region Compatibility: Both signals for NTSC and PAL are supported, but they are not converted to each other.  That means you can plug in whatever signal your target device is compatible with, but signal for NTSC might not work on devices for PAL High Definition Multimedia Interface and for Vice Versa. 5、Performance – Audio: The audio performance on the High Definition Multimedia Interface Converter for RetroScaler2X is good although we would have to stop short of saying it was perfect. In general uses, there are no issues with the audio digitization but on brassiere sounds like explosions theoutput may sound a little rougher than it did through the OSSC. This isn’t something you’re likely to even notice on a TVs speakers, though you might if you have an external amp or home theatre system. In that case of course, it’s usually perfectly easy to route audio around the converter for RetroScaler2X anyway. 6、6.Wide Compatibility: Another great feature of the High Definition Multimedia Interface Adapter for RetroScaler2x is that it outputs a true 480p60 signal, making it compatible with every device I tested it with!  Compatibility is a big issue for retro-gamers, as modern displays aren’t used to the resolution or refresh rate of these older consoles.  This device is an excellent helper for streamers who want the highest chance of compatibility. 7、7.The Pass-through: By putting the converter for RetroScaler2X into pass-through mode, incoming composite, s-video or component signals are simply transparent and digitized into High Definition Multimedia Interface. Support for 240p is rare in the world of High Definition Multimedia Interface, but byadding a simple High Definition Multimedia Interface to VGA converter, you can convert the signal back to the analogue domain again. This makes the unit a perfect transcoder to go with 15 kHz displays for PVMs, or of course, for OSSC. High Definition Multimedia Interface Converter for RetroScaler2x*1 British Regulations Plug*1 European Regulations Plug*1 Australian Regulations Plug*1 American Regulations Plug*1 Multi-plug Adapter*1 Manual*1 Name: High Definition Multimedia Interface Converter for RetroScaler2x  Color: red/blue Interface: input YPBPR/S-VIDEO/AV to High Definition Multimedia Interface Scope of application: retro game console for PS2/for N64/for NES/for SEGA Dreamcast/for Saturn/for MD1 Product size: about 10.5* 6.5* 2.5cm/ 4.13* 2.56* 0.98in Product box size: about 22* 21.5* 5.5cm/ 8.66* 8.46* 2.17in Product box weight: about 480g Supported Hosted： For Vic20 For Atari2600 For Msx For NES For N64 For 6/7NGC For SFC For SNES For SuperFamicom  For PIAYSATION2 For SEGA Saturn For MD2 For MD1 For Dreamcast For Commodore64 (C64) Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.