HDMI Switch 2 > 2 with Remote Control Key benefits Connect two HDMI sources to two HDMI displays simultaneously, saving hardware cost by sharing sources between monitors or projectors. Use as a switch (select one source to both displays) or as a splitter (send each source to its own display) depending on your setup. Frontpanel button and included remote provide fast, convenient source selection without replugging cables. Builtin signal amplification extends reliable HDMI transmission for longer cable runs. Core functions and compatibility 2x2 HDMI switch/splitter: supports two HDMI inputs and two HDMI outputs. Resolution support up to 3840 x 2160 @ 30 Hz (4K30) and standard DTV resolutions: 480i, 480p, 720i, 720p, 1080i, 1080p. 3D video compatible. Supports 8/10/12bit color depth for improved color fidelity. Transfer rate up to 3.2 Gbps and TMDS clock up to 320 MHz for stable signal handling. Cable and signal details Compatible with standard AWG26 HDMI cables. Recommended maximum cable lengths: inputs up to 15 meters, outputs up to 25 meters at 1080p resolution (actual performance may vary with cable quality and environment). Signal amplification built in to maintain HDMI integrity across supported lengths. Controls and operation Manual frontpanel button for immediate switching. Infrared remote control for convenient operation from a distance. Easy to install: plugandplay with HDMI source devices and displays; no complex configuration required. Practical use scenarios Conference rooms: Share a laptop and a PC between two displays or mirror the same presentation on a projector and a wall monitor; switch sources quickly during meetings. Home entertainment: Connect a game console and Bluray player to two TVs and choose which device displays on both screens or designate each to a separate TV. Classrooms and trade shows: Drive a projector and a nearby monitor from two different media players, switching or duplicating content as needed for demonstrations. What it delivers Flexible routing of HDMI video and audio between two sources and two displays. Reliable performance for Full HD and 4K30 applications with 3D support and multibit color handling. Simple controls and signal amplification to reduce cable and setup limitations. Specifications (summary) Type: 2x2 HDMI switch/splitter with remote Max resolution: 3840 x 2160 @ 30 Hz (4K30) Supported DTV resolutions: 480i, 480p, 720i, 720p, 1080i, 1080p 3D support: Yes TMDS bandwidth: up to 3.2 Gbps; TMDS clock up to 320 MHz Color depth: 8/10/12bit Cable support: Standard AWG26 HDMI (Input up to 15 m; Output up to 25 m at 1080p) Controls: Frontpanel button and infrared remote This HDMI Switch 2 > 2 with Remote Control provides a straightforward, reliable way to route and duplicate HDMI sources across two displays with remote or manual control and builtin signal amplification for extended cable runs.