Features: Description: l 1. Remove the screws that fix the resin bucket on the side where you want to install the drip stand l 2. Fix the drip holder as a whole to the thread, and then tighten the thumb screw again l 3. During the printing process, the drip tray cannot touch your bottom plate l 4. After printing, move up the build platform l 5. Remove the platform and hang it on the bracket l 6. The uncured resin will drip back into your trough l 7. You can close the lid as needed Specification: l Size: length about 50mm, width about 20mm, height about 55mm l Applicable models: Phrozen Sonic Mini, Most other 5.5″ / 6″ LCD 3D Printers where the resin vat is secured with thumbscrews Packing includes: l 1 x Resin Drip Stand Note: l Not applicable models: all models of Anycubic (the printing platform is different)