The product adopts an integrated molding design to prevent rain and dust from entering the internal parts to corrode them, making it longer and The product has a 12V input voltage and a 22MM handlebar universal inner diameter, which is suitable for most ATV beach cars without throttles The product handle adopts a sealable and pass-through design, which does not affect the installation of decorative accessories such as handlebar plugs on the outside of the handlebar, making it more beautiful and convenient to use The product has added a standby mode. After switching to standby mode, the electric heated handlebar automatically maintain a constant temperature of about 50 degrees, which is more convenient to use [Handle length]:left handle:125mm; right handle:125mm [Suitable pipe diameter]:22mm [Handle power]:1st gear red:31W; 2nd gear blue:23W; 3rd gear green:14W [Thumb power]:1st gear red:1.6W; 2nd gear blue:1.2W; 3rd gear green:0.8W [Working ambient temperature]:-20-+50 [Handle type]:Sealed or openable electric heating handle [Applicable models]:12V handle with a diameter of 22mm ATV Beach Car Warm Tips:When wiring, red connects to the positive pole and black connects to the negative pole. If the connection is reversed, the switch burn out, but the handle heat up. Therefore, when wiring, please make sure the positive and negative terminals are connected before wiring to prevent burning. Installation guide not included, we strongly recommend you professional installation. Note:The picture shows a high-definition rendering, and there is a slight color difference actually received, which not affect the use. Colour:As Shown Material:rubber Package Contents: 1 * Electric Heating Handle Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.