<p>Adopt ARM -M3 processor , and include a 2.4-inch color TFT display screen.</p> <p>Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.</p> <p>easy to install and operate.</p> <p>With Auto\/Normal\/Single trigger modes, easy to capture the moment waveform.</p> <p>Available rising or falling edge trigger.</p> <p>Observable previous waveform before trigger(negative delay).</p> <p>With waveform parameter digital display, including frequency, period, duty ratio, MAX.\/MIN.\/AVG.\/-\/virtual values.</p> <p>Short-circuit and open-circuit detection: can help the user find out the soldering error.</p> <p>TFT controller recognition function.</p> <p>The SMD has been soldered, more suitable for electronic beginner.</p> <p>Maximum Real-time Sampling Rate: 1MSa\/s</p> <p>Analog Bandwidth: 0-200KHz</p> <p>Sensitivity Range: 5mV\/-20mV\/</p> <p>Maximum Input Voltage: 50Vpk (1X probe)</p> <p>Input Impedance: 1M ohms\/20pF</p> <p>Accuracy: 12 Bits</p> <p>Record Length: 1024 points</p> <p>Coupling Modes: DC \/ AC \/ GND</p> <p>Time Base Range: 500s\/ - 10us \/ </p> <p>Trigger Modes: Auto, Normal, and Single</p> <p>Trigger Position: Center of Buffer</p> <p>Supply Voltage: DC 9V(8-10V)</p> <p>Current Consumption:~120mA @ 9V</p> <p>Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.</p> <p>Voltage: AC 220V</p> <p>Colour:As Shown</p> <p>Material:plastic</p> <p>Package Contents:</p> <p>1 x Handheld Pocket Oscilloscope Kit</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>