Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump Adustable

NOK 649,00
+ NOK 98,49 i frakt

Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump Adustable

  • Merke: Unbranded
Solgt av:

Fireyouracing Motorcycle Performance Hydraulic Brake Clutch Master Cylinder Rod system Efficient Transfer Foot Pump Adustable

  • Merke: Unbranded

NOK 649,00

Spar NOK 300,00 (31%)

Veiledende pris

NOK 949,00
På lager
+ NOK 98,49 i frakt
Solgt av:

NOK 649,00

Spar NOK 300,00 (31%)

Veiledende pris

NOK 949,00
På lager
+ NOK 98,49 i frakt

Vi godtar følgende betalingsmetoder

Beskrivelse

Material: Alumimun with CNC processing Piston: Diameter 14mm. length 23mm Package: 1 pcs * Pump ; 1 set * extra extension parts; 1 set * M12 Banjo Bolts Working Length: It will have 3 working length as like below list: 1. When the piston is fully pushed to the right. The measured size of the product is about 130mm. 2. When the piston is fully pushed to the left. The measured size of the product is about 153mm. 3. When the piston is fully pushed to the left and the extension rod is added. The measured size of the product is about 180mm. Note before your using it:Pump under the head of the anchor head is silking, can a wide range of length ofthe distance, adjust position according to the model, using thread tighten glue,prevent loose change position. Some vehicles anchor head is U plate (Suzukiking GS125 machine, for example), as long as take U plate, installs to the pumphead end Fixed long screw pump under as m10x1.25 standard, and the adjustable range is long,suitable for most models modified line of clutch and brake line, but some models(such as Suzuki king GS125 machine) of the original car pull head fixed positionis silking, need to use 8.2 mm drill bit, removing silking to install Installation method 1 First will fill the brake oil pump under lie flat, do not have air, silk mouth is verybig, can be seen there was a bubble 2 See above screw, tubing with good twist screws, do not tighten, request screwside holes can be exposed 3 This is the key, be sure to look good. Link on the pump and tubing, and highup, the oil pump oil cup, and then pressure several times at random (10) handle,OK now just waiting for (dont allow any action) 5-10 minutes later, in the aboveside didnt tighten the screw hole will see the brake oil flow out, then lock screw,exhaust 4 Hydraulic clutch exhaust complete inspection methods: push the pump underthe wire to the pump body en croute, hand pinch on the pump handle, handle tipto move about 3 cm, knead not bottom go to, is correct. (press the handle untilthe pressure not bottom go to, there are about 3 cm distance handlebar, itfinished the exhaust, but loading debugging), loading, must pull wire all out, againunder the fixed pump, (make sure to loosen the clutch handle, wire all stretchedout) Please note that you may find oil at product or package when you open the package as like below photo. The reason is that, before each product shipping out, we will do bleeding DOT oil for seal testing to keep 100% no problem for customer.1.Delivery Time is referred as below:Country Approx.
  • Fruugo-ID: 230407231-491902231
  • EAN: 9366192182278

Produktsikkerhetsinformasjon

Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produktsikkerhetsetiketter

CE Mark
Sikkerhetsadvarsler: important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Usage Precautions Environment: Do not use in wet, damp, or flammable environments unless specified as safe for such conditions. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Maintenance and Care Cleaning: Disconnect from power before cleaning. Use only manufacturer-recommended cleaning methods and solutions. Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. Specific Warnings Avoid Hazards: Keep the product away from sharp objects, water, and heat sources. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.

Levering og retur

Sendes i løpet av 24 timer

  • STANDARD: NOK 98,49 - Levering mellom kl tir. 28 oktober 2025–fre. 07 november 2025

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur

Produktoverholdelsesdetaljer

Vennligst se samsvarsinformasjonen som er spesifikk for dette produktet skissert nedenfor.

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produsent:
Følgende informasjon skisserer kontaktinformasjonen til produsenten av det aktuelle produktet som selges på Fruugo.

  • Xingtai Ranjiu Trading Co Ltd
  • Xingtai Ranjiu Trading Co Ltd
  • Room 303, Unit 2, Building 4, Qingfeng Community
  • Xingtai
  • CN
  • 32702
  • yonghong21@outlook.com
  • 13265007967

Ansvarlig person i EU:
Følgende informasjon skisserer kontaktinformasjonen til den ansvarlige personen i EU. Den ansvarlige personen er den utpekte økonomiske aktøren basert i EU, som er ansvarlig for samsvarsforpliktelsene knyttet til det relevante produktet som selges til EU.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch.
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 682797075