1、Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor. 2、The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment. 3、The main output waveform are sine wave and square‑wave, triangular wave, sawtooth wave. 4、Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave. 5、Small size, multiple functions, simple operation, easy to carry. 6、Made of high quality material, durable and practical to use. Item Type: Function Generator Material: ABS Color: As shown in the picture Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don’t care the phase noise and distortion, it can output full frequency range. Resolution: 1Hz Output Waveforms: Sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave. Sinewave Distortion: 1% (frequency <1kHz); 0.5% (frequency >=1kHz) Output Amplitude: Maximum ±10V(P-P). Output Impedance: 50 ohm DC Offset: Maximum ±10V, can be disabled Internal Filter: For sinewave or pulse, can be turn on/off Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended. Weight: Approx.172g/6.1oz 1 x Function Generator 1 x USB Cable 1 x Instruction Manual