1. for debugging detector, for Pico RP2040 USB debugging downloader 2. The Debug Probe is a cost-effective, USB to serial debug and UART bridge. The required hardware and are provided to support "plug and play" debugging of Pico and other microcontroller and microprocessor based platforms. 3. for Debug Probe provides processor serial debugging interface (by default, this is the ARM serial wire debugging interface) and industry standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the 3-pin Debug Interface Specification. 4. The for Debug Probe is a USB device that provides a UART serial port and a standard Arm serial wire debug (SWD) interface. 5. The probe is designed for simple, solderless, plug-and-play debugging. Type: Debug Probe Purpose: debugging detectors Specifications: PICO Debugger Function: 1. USB to ARM Serial Wire Debug (SWD) port 2. USB to UART Bridge 3. Compatible with CMSIS- standard 4. Use with OpenOCD and other tools that support CMSIS- 5. Open source, easy-to-upgrade firmware Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Colour:As Shown Material:PCB+Plastic Package Contents: 1 x for Debugging Probe 1 x Plastic Box 1 x Data Cable 1 x 3-Pin Debugging To 3-Pin Cable 1 x 3-Pin Debugging To 0.1-Inch Header (Female) Cable 1 x 3-Pin Debugging To 0.1 Inch (Male) Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.