accessories Drawing machine tools Drawing machine scales Electronic scales Function: Detect and calibrate the poundage of the wire drawing machine before threading. Features: Exquisite appearance, easy to carry overview The electronic scale gauge is based on a high-performance embedded microcomputer, with accurate weighing, stable performance, compact appearance, easy to carry, vibration resistance, and high cost performance. start up Press the "ON/OFF" key to turn on the machine, and the display will display "0.0 or 0.00" after about two seconds. At this time, the scale gauge is initialized and enters the measurement state. unit conversion Press the "UNIT" key, and the scale meter will perform cyclic conversion among the four units of KG (kg), lb (pound), Jin (jin), oz (ounce) (1kg=2.2lb=2Jin=35oz). Return to zero: Press the "TARE" key, and the measured value of the scale gauge will be reset to zero. Note: When it is used to measure the poundage of the wire drawing machine, because the tension of the wire changes during the measurement process, It is necessary to take the average value of multiple measurements, and the average value is the final poundage of the wire drawing machine. Note this item: 1. Please hold the lifting ring or add an auxiliary tool side scale on the lifting ring, do not hold the shell side scale, otherwise the error of the measured scale will exceed the standard. 2. Try to avoid strong touch and impact during use. 3. The shell of the portable electronic scale is made of ABS1 C-process plastic. When cleaning, please use a soft cloth and clean water or detergent to wipe it. Strictly use benzene, nitrogen solvents, caustic soda liquid and corrosive substances for cleaning . 4. If the sign of insufficient power is displayed, please replace the battery in time. If the electronic scale is not used for a long time, the battery should be taken out to avoid damage to the circuit due to battery fluid. Weight: 145g Packing size: 17*2.5*10CM Colour: Black Quantity: 1 (with battery) Material: ABS