Ethernet Module Jack

✅Tool-Free Installation:This UTP CAT6 jack is a female RJ45 connector designed compatible with efcompatible withtless setup; Just align the wires by color code and snap the clear cover into place. ✅Premium Percompatible withmance: ANSI//EIA 568-C.2 Category 6 compliant with PoE support, compatible with 23-26 AWG solid/stranded copper wires compatible with high-speed networking. ✅Enhanced Durability: 50μ gold-plated contacts with full copper conductors resist ; Equipped with a dust-proof shutter to maintain stable signal transmission. ✅Universal Compatibility: Works with patch panels, mount boxes, and wall plates. Supports mixed installations on a single plate compatible with flexible deployment. Notes: 1. Operating Temperature Range: -10°C to +60°C. 2. Electrical Characteristics: 2.1 Voltage/Current: 125V AC, 1.25A (25°C). 2.2 Withstand Voltage: 700V DC/MIN (no breakdown). 2.3 Insulation Resistance: 500MΩ. 2.4 Contact Positive Resistance: <0.03Ω 3. Mechanical Properties: 3.1 Insertion compatible withce: 20N. 3.2 IDC Terminals: Phosphor bronze, suitable compatible with wire sizes 22-26AWG, with a minimum of 200 insertion and removal cycles. 3.3 Pins: Phosphor bronze with gold plating, with a minimum of 750 insertion and removal cycles. 4. Environmental Requirements: 4.1 The product must comply with ROHS, REACH, and other environmental standards. Color: As shown Material: PC Package Contents: 12*Category 6 network module ports Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.