ESP32-S3-Touch-LCD-2.8 is a microcontroller development board that supports 2.4GHz WiFi and Bluetooth BLE 5. It integrates large-capacity Flash and PSRAM, and the onboard 2.8-inch capacitive touch screen can smoothly run LVGL and other GUI interface programs: combined with a variety of peripheral interfaces, it can quickly develop ESP32-S3 HMI and other applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz Support 2.4 GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), onboard antenna Onboard 512KB and 384KB ROM, stacked 16MB Flash and 8MB PSRAM Onboard 2.8-inch capacitive touch screen, 240x320 resolution, 262K color Support I2C interface to control capacitive touch, 5-point touch, support interruption. UART, I2C and some IO interfaces are introduced, and full-speed USB serial port is integrated. Onboard speaker, QMI8658 six- sensor, clock sensor, Micro-SD card holder and battery charging management module, etc. Support flexible clock, multiple power modes and other accurate control, to achieve multi-scenario low power mode. Due To different batches, there may be differences in product appearance, color, and printed text, which does not affect the use. Colour:Black Material:PCB+Glass Package Contents: 1 * ESP32-S3 Development Board with Touch Screen Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.