Material: 304 Stainless steel Thread Pitch: 1.25MM Color: Silver Diameter: 16mm It fits dispenser wall up to 17mm thick. Packing area: 1x stainless steel tap, 2x silicone seals, 2x stainless steel cover rings 1. Quick Installation This Beverage Dispenser Replacement Spigot requires a 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 17mm thick. 2. Multi-Function The Beverage Dispenser Replacement Faucet is suitable for dispensing tea, wine, water, juices, and other beverages. 3. Premium Quality The Beverage Dispenser Replacement Spigot is made of high-quality solid stainless steel, lead-free material, durable and corrosion-resistant, safe for health and designed for long-term use with proper care. 4. Easy to Use With a diameter of 16mm, the outlet provides a constant, moderate, and even flow. Easy to operate for all age groups and designed to prevent dripping. Note: Always open the lid of the container when dispensing, as a vacuum may form over time and reduce dispensing performance. 5. Notice Wash and remove the white protective films on the washers before use. If necessary, use a 3/4 inch wrench for the nut; do not over-tighten. Rinse thoroughly with clean water with the handle in a partially open position (45 degree turn) after use. If used for sugary drinks, it is recommended to remove the spigot from the dispenser and clean it thoroughly.