Designed For FORScan software, compatible with software venders; For FORScan, For Elmconfig, For FF2 and For FoCCCus, plus more.Support Windows XP and WIN7 32bite.Basic Features:Reset fault /trouble codes / parameter ids (PIDs),Change car configuration data,Run tests,Services procedures,Program certain models.With the cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.OBDII Protocols:SAE J1850 PWM (41.6Kbaud)SAE J1850 VPW (10.4Kbaud)ISO9141-2 (5 baud init, 10.4Kbaud)ISO14230-4 KWP (5 baud init,10.4 Kbaud)ISO14230-4 KWP (fast init,10.4 Kbaud)ISO15765-4 CAN (11bit ID,500 Kbaud)ISO15765-4 CAN (29bit ID,500 Kbaud)ISO15765-4 CAN (11bit ID,250 Kbaud)ISO15765-4 CAN (29bit ID,250 Kbaud)SAE J1939 CAN (29bit ID,250*Kbaud)CAN (11*bit ID, 125*Kbaud)CAN (11*bit ID, 50*Kbaud)Please note that many models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.ELM327 supports For HS CAN from the stock, because For HS CAN completely matches to the OBD2 standards.It occupies pins 6 and14. MS CAN bus occupies pins 3 and 11.Supported Vehicles:Many vehicles that can be addressed using an ELM via an OBDII connector.Note:Installation guide not included,Please check as much as possible to make sure the item is what you need.Different batches may have different printed labels, but it does not affect the use.Colour:As ShownMaterial:Plastic