1、The exhaust fan has a uniform heat dissipation and very low noise, can be used for long use. 2、The heating plate is constant temperature PTC heating, the incubation temperature is guaranteed. 3、The panel of this automatic incubator is chip panel, which can achieve one key incubation control. 4、The humidity probe is a digital probe, which has a stable performance, can test the humidity accurately. 5、The temperature probe has a precise temperature sensor, accurately collecting the information. Item Type: Automatic Egg Incubator Material: ABS, Aluminum Rated Power: 80W Motor Power: Maximum 4W Motor Working Mode: Forward/Reverse Egg Turning Frequency: 2h/time Temperature Control Range: 37-39℃ Scope of Application: 48 Eggs/56 Eggs/96 Eggs/112 Eggs Installation Notes: 1. Find a box as an incubation carrier. Intimate reminder: In the process of designing the size of the box, the size is generally ≥ length 50x width 50x height 35cm (the box is not limited to these two types, here is an example). 2.It is necessary to punch holes in the box and install accessories. Intimate reminder: For the screw hole position, please refer to the actual product. (Because the panel needs to be connected to the power supply, please add an inner box for safety) 3.The box body is ventilated for air circulation. 1 x Panel 1 x Motor 1 x Exhaust Fan 1 x Heating Film 1 x Humidity Probe 1 x Temperature Probe 1 x Motor Link Line 1 x Plug 1 x Manual 12 x Screw 8 x Nut 8 x Gasket 8 x Insulation Column