Dot Matrix Control Module LED Single Chip Microcomputer Controller 4‑in‑1

NOK 229,00
GRATIS frakt

Dot Matrix Control Module LED Single Chip Microcomputer Controller 4‑in‑1

  • Merke: Unbranded
Solgt av:

Dot Matrix Control Module LED Single Chip Microcomputer Controller 4‑in‑1

  • Merke: Unbranded
Veiledende pris: NOK 389,00
Pris: NOK 229,00
Du sparer: NOK 160,00 (41%)
Solgt av:
NOK 229,00
GRATIS frakt

På lager

Vi godtar følgende betalingsmetoder

Beskrivelse

Features 1、It is an integrated serial input/output common cathode display driver 2、This module is connected to a microprocessor and an 8‑digit 7‑segment digital LED display. It can also be connected to a bar graph display or 64 independent LEDs. 3、The module includes an on-chip B-type BCD encoder, multi-channel scanning loop, segment word driver, and an 8 x 8 static RAM for storing each data. 4、Each data can be addressed. No need to rewrite all the display when updating, it also allows the user to choose to encode or not to encode each data. 5、The entire device includes a 150μA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows users to display 1-8 bits of data, and a detection mode that allows all LEDs to emit light. 6、Only 3 IO ports are needed to drive 1 dot matrix, no flicker when dot matrix display, support cascading Specification Item Type: Dot Matrix Control Module Material: Synthetic Cardboard A single module can drive an 8 x 8 common negative dot matrix Fixing Screw Holes: 64 Hole Diameter: Approx.3mm / 0.1in Wiring Instructions: 1. The left side of the module is the input port, and the right side is the output port. 2. When controlling a single module, only need to connect the input port to the CPU 3. When multiple modules are cascaded, the input of the first module is connected to the CPU, the output is connected to the input of the second module, the output of the second module is connected to the input of the third module, and so on. .. Take 51 Microcontroller as Example: VCC → 5V GND → GND DIN → P2.2 CS → P2.1 CLK → P2.0 Package List 1 x Dot Matrix Control Module 1 x 5 Pin Cable
  • Fruugo-ID: 271638470-602150977
  • EAN: 9308869137235

Produktsikkerhetsinformasjon

Vennligst se produktsikkerhetsinformasjonen som er spesifikk for dette produktet skissert nedenfor

Følgende informasjon er gitt av den uavhengige tredjepartsforhandleren som selger dette produktet.

Produktsikkerhetsetiketter

CE Mark
Sikkerhetsadvarsler: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

Levering og retur

Sendes i løpet av 2 dager

  • STANDARD: GRATIS - Levering mellom kl tir. 28 oktober 2025–man. 03 november 2025 - GRATIS

Sendes fra Kina.

Vi gjør vårt beste for å sikre at produktene du bestiller, leveres til deg i sin helhet og i samsvar med dine spesifikasjoner. Skulle du likevel motta en ufullstendig bestilling eller andre varer enn dem du bestilte, eller hvis du av en eller annen grunn ikke er fornøyd med bestillingen, kan du returnere bestillingen eller enkeltvarer i bestillingen og motta full refusjon for varene. Se fullstendige retningslinjer for retur