1. Copper material and anti-freezing design This brass hose end faucet is made of copper material, with its surface plated with chromium and nickel. The brass double faucet is equipped with a sealing ring, which has good sealing performance and can help prevent the leakage of antifreeze. It is exquisitely designed, practical, and suitable for long - term use. 2. Double - head interface and filtering design This distributive faucet is not a traditional single - head faucet. It has two independent water outlets and can be connected to two water pipes at the same time. This outdoor brass faucet can save time when in use. The water outlet at the bottom of the main faucet has a filtering design, which can filter out dirt. 3. Two independent valves to prevent water leakage This brass faucet is controlled by two single valves that are independent of each other and have no influence on each other, making it convenient to use. There is a classic on - off plug valve in the front and a ball valve in the back, ensuring relatively tight waterproofing and firm screwing, helping to avoid water infiltration and dripping. 4. G1/2 (20mm), easy to connect and install This brass double faucet measures 13×8.5 cm, and its connection thread is the standard G1/2 (20mm). The closed connection ring can ensure good sealing at the main connection of the metal or plastic thread. The installation process is simple. It can be easily connected and fixed on the wall or other vertical surfaces without using additional tools. 5. A faucet for both indoor and outdoor use This brass faucet is suitable for various indoor and outdoor scenarios. The "1 - inlet, 2 - outlet" design is suitable for washing machines, outdoor gardens, industrial sites, households, irrigation, car washes, watering cans, etc. Using it can bring convenience to daily life.