Features 【Boost Module】This is a non-insulated DC power converter module with long service life. 【Stable Performance】: High performance and stable output, converts 10-60VDC to 12-97VDC. 【High Efficiency】:High quality components ensure high conversion efficiency up to 97%. Function: Designed with intelligent fan for temperature control, which works automatically when the temperature reaches about 60 °C, and stops when the temperature falls below 60 °C. 【Application】: Widely used for high performance solar street light drive, various LED lighting CV drives, vehicle mounted and mobile device power supply, self-adjustable CV-CC power supply, solar power charging and various battery charges. Specification: Input voltage: DC 10 V to 60 V. Input current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A Quiescent current: 15mA (when converting 12V to 20V, higher output voltage increases quiescent current) Output voltage: 12-97V infinitely adjustable (cannot be used to lower the voltage) Output current: 22A (based on the input and output voltage difference, the greater the voltage difference, the smaller the output current. Please improve heat dissipation if the current is above 15A.) Constant current range: 0.8-22A (+/-0.3A) Reverse Polarity Protection: Yes (150A Power MOS Reverse Polarity Protection) Input Low Voltage Protection: Yes (10V-50V adjustable, self-recovery) Operating temperature: -40°C to 85°C (if the temperature is too high, please improve heat dissipation). Frequency: 150 KHz. Conversion Efficiency: 92% to 97% (The efficiency depends on input/output voltage, current and voltage difference. The smaller the difference, the higher the efficiency.) Input over current protection: yes (automatic protection when the input is more than 40A and the supply voltage does not increase) Short circuit protection: yes (input fuse 60A), please work carefully, try not to cause short circuit. Reverse Input Protection: Yes ((150A power MOS tube, can be connected reverse for long time) Installation method: four 3mm spacers Wiring method: terminal blocks (Please use copper wire with large current) Output power: max. Output power = input voltage x 30 A (at input 12 V, maximum output power = 12 V x 30 A = 360 W). Weight: 372 g / 13.1 ounces (approx.) Package list: 1 x module. Package List