Dental Light Cure Adhesive Kit Small Set Orthodontic Bonding System Tools

Item Type: Orthodontic Dental AdhesiveOptional Type: Large Set, Small SetMaterial: PlasticService Life: 18 MonthsStorage Condition: Keep below 25℃, do not freezeMain Technical Performance Index: Curing time not more than 3000s, adhesive shear strength MPa>17.2Feature:1. Mainly used for bonding various dental orthodontic accessories2. Less waste, independent operation3. New-generation enamel adhesive resin, complete accessory4. 2 different types available, choose by your needsCompatible with: All kinds of dental orthodontic attachment adhesionUsage:1. Tooth preparation: Clean the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun2. Acid-eroded tooth surface: Apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry. The tooth surface after acid-eroded is chalky. If there is no chalky appearance, prolong the acid etching time3. Primer: Brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush, wet is enough4. Bonding: Apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer. Glue the bracket and the tooth surface immediately after applying the paste. Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding. Remove excess liquid and paste after 40-60 seconds. After curing for 5 minutes, orthodontic operation can be performedPackage List:1 x Paste 3.5g1 x Etching Agent 2.5ml1 x Liquid Agent 8ml7 x Brush Head1 x Needles1 x Mixing Pen