DC6-60V PWM Motor Speed Controller Power Controller with LED Digital Display Slow Start/Stop Revolving Speed Time Adjustable Features: 1.The product is made of high-quality materials with guaranteed quality 2.Stable product performance and long service life 3.The product design is lightweight and has a wide range of application scenarios, making it very suitable for DIY enthusiasts 4.The design of buttons makes it more convenient for customers to use 5.The time for slow start/slow stop can be set, with a maximum current of 30A Parameters: Input voltage: DC6-60V Output voltage: linear under load Output current: 0-30A Continuous current: within 20A Speed regulation type: current regulation Speed regulation method: jog+- Speed regulation range: 0-100% Control frequency: 21KHZ Wiring type: fence type terminal blocks Supporting motor: DC brush motor Length * width * height module size: 96mm * 61mm * 34mm Length * width panel opening: 92mm * 56mm Speed digital display: percentage 0-100 Setting instructions: The slow start time setting function is adjustable from 0 to 10 seconds, with a default speed of 1 second, from 1000 to 100%. The slow stop time setting function is adjustable from 0 to 10 seconds between 2000 and 100 seconds, with a default of 1 second. The lower speed limit setting function is adjustable from 0 to 80% for a minimum speed of 3:000 to 080, and is less than the maximum speed setting value. The default is 0. The upper speed limit setting function is adjustable from 0 to 100% for a maximum speed of 4:000 to 100%, and is greater than the minimum speed setting value. The default is 100%. Acceleration and deceleration value setting function 5:001 002 005 010 015 020 025: Each press of the acceleration and deceleration key changes the speed accordingly by 1%, 2%, 5%, 10%, 15%, 20%, and 25% Attention: The input voltage must be divided into positive and negative, and 220V cannot be input. The input voltage must be equal to the rated voltage of the motor within 6-60V. Package include: Module X1 _x000D_