N4D3E16 DC 12V 24V 16 In 16 Out Rs485 Remote Control Switch Plc Io Expansion Board Modbus Rtu Module 1xDC 12V 24V 16CH Input & 16ch Output Rs485 Modbus Rtu Module 6 Photoelectrically Isolated Input Ports (Npn Active Low Level) Application: Plc Io Expansion Board, Smart Home, Home Automation, Smart Home; Ptc Camera, Security Monitoring, Identification System; Network Camera, Led Light Driver, Automatic Curtain Control, Modbus Rtu Instruction, Supports 03 06 Function Code (Some Registers Support 16 Function Code) Description: 1. Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V) 2. Working current: 8-50MA 3. 16 photoelectrically isolated input ports (NPN active low level) 4. 16 channels of output (ULN2803 NPN output) 5. "Open" "Close" "Instant" "Self-locking" "Interlocking" "Delay" 6 commands 6. 16 inputs can remotely control the 16 outputs of another board through the RS485 bus (relevant registers need to be set) 7. MODBUS RTU instruction, supports 03 06 function code (some registers support 16 function code) 8. Under the "Delay" , the maximum delay is 255 seconds; 9. The MODBUS can be executed in the serial port terminal (serial port assistant) OR "Modbus Poll" and press Enter; 10. In MODBUS mode, up to 64 devices can be supported in parallel. 11. The Default baud rate is 9600BPS. Baud rate can be by jumper: 2400 4800 9600 19200BPS 12. Maximum load: The maximum load current of each channel is 300MA DIN rail box parameters: 1. Product model: UM72 2. Installation : DIN35 and C45 guide rail 3. Width: Suitable for PCB board width UM72 (72mm) 4. Insulation level: flame retardant VO level 5. Backplane length: suitable for 100 mm PCB board Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Material: PCB colour: As shown Package Contents: 1 x RTU Module 1 x DIN Rail Housing Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.