Feature:1. 3 Test Modes: The servo tester has 3 modes to test the servo or electronic governor, namely manual mode, neutral mode and automatic wiper mode.2. Connect 1-3 Servos: 1‑3 servos can be connected at the same time to test the synchronization and consistency of 1‑3 servos.3. Connect 1-3 ESCs: Support to connect 1‑3 ESCs at the same time, test and compare their response time separately.4. For CCPM Helicopter: Can be connected to the 3 servos of the CCPM helicopter, adjust the helicopter and select the servos through the neutral and synchronization functions.5. Aluminum Alloy Shell: The servo tester is made of excellent aluminum alloy material, which is corrosion resistant and durable after anodizing.Specification:Item Type: Motor Servo TesterProduct Size: Approx. 49 x 43 x 25mm / 1.9 x 1.7 x 1inMaterial: Aluminum alloyApplicable Counterweight: Servo, motor, ESCAdjustment Mode: Manual, automatic, neutralOutput Signal: 1.5ms ± 0.5msInput: DC4.8-6.0VOutput: ≤15mA(5.0)Torsion: 0.08kg/cmSpeed: 0.12s/60° at 3.7VSignal: 900-2100uSFrequency: 50-330HzServo Function:1. There are 3 modes to detect steering gear or ESC:Manual Mode: You can turn the potentiometer at different speeds to measure the response timeFinding Neutral Point Mode: return the servo to the neutral pointAutomatic 2 Brush Mode: make the steering gear swing at the maximum angle of two-brush2. Can connect 1-3 servos at the same time to test the synchronization and consistency of 1-3 servos3. You can connect 1-3 ESCs at the same time, test and compare their response time4. Can be connected to the 3 servos of the CCPM structure helicopter at the same time, using the neutral position and synchronization function to debug the helicopter and the steering gear selection5. Can be connected to the servo on the fixed wing aircraft, and use the neutral position and other functions to install the steering wheel and debug the aircraft.Package List:1 x Servo Tester